PRODUCTS


+
  • 20200806_133542_072.jpg
  • 20200806_133542_075.jpg
  • 20200806_133542_074.jpg
  • 20200806_133542_076.jpg
  • 20200806_133542_073.jpg

HDT 160 Manual butt fusion welding machine

Item No.:

B160(3)


Summary

Welding Range: 40mm-160mm
Cooling Way: Air Cooling
Control: Manual
Frequency Range: Intermediate Frequency
Electric Current: AC
Type: Hot Melting

Message

Description


Model

HDT160

Pipe size(mm)

40mm,50mm,63mm,75mm,90mm,110mm,125mm,140mm,160mm

Heating plat Max temp

270°C

Temp deviation in surface(170-250)

±5°C

Max tolerance of welding jointing

0.3MM

Working voltage

220V

Working frequency

50-60HZ

Power/voltage of heating plate

1KW / 220V

Power/voltage of planning tool motor

0.9KW / 220V

Total Power 1.9KW

Overall weight of machine(kg)

38KGS

Wall thickness (mm)

Bead height (mm)

Bead build-uppressure (MPa)

Soaking time t2(sec)

Soaking pressure (MPa)

Change-ov er time t3(sec)

Pressure build -uptime t4 (sec)

Welding pressure (MPa)

Cooling time t5 (min)

0~4.5

0.5

0.15

45

≤0.02

5

5

0.15±0.01

6

4.5~7

1.0

0.15

45~70

≤0.02

5~6

5~6

0.15±0.01

6-10

7~12

1.5

0.15

70~120

≤0.02

6~8

6~8

0.15±0.01

10~16

12~19

2.0

0.15

120~190

≤0.02

8~10

8~11

0.15±0.01

16~24

19~26

2.5

0.15

190~260

≤0.02

10~12

11~14

0.15±0.01

24~32

26~37

3.0

0.15

260~370

≤0.02

12~16

14~19

0.15±0.01

32~45

37~50

3.5

0.15

370~500

≤02

16~20

19~25

0.15±0.01

45~60

50~70

4.0

0.15

500~700

≤0.02

20~25

25~35

0.15±0.01

60~80

 

Bead build-up pressure and welding pressure in the form is the recommended interface pressure, the gauge pressure should be calculated with the following formula.

Welding Introduction For HDPE:

1. Fix the proper clamps on the machine rack.

2. Put HDPE pipes on the clamps and tighten the bolts.

3. Mill the end of the HDPE pipes with the facer.

4. Put the heater plate on the machine rack and heat the pipes for proper time.

5. Remove the heater plate and connect the HDPE pipes.

 

Online Message


Thank you for your attention to us. If you have any needs or comments, please leave us a message.